Igama kunye nomsebenzi wecandelo ngalinye le-SMT

1. Umamkeli

1.1 Ukutshintsha kwaMandla angundoqo: vula okanye cima i-mainframe Amandla

1.2 Umbono weMonitor: Ukubonisa ukuqatshelwa kwemifanekiso okanye amacandelo kunye namanqaku afunyenwe yi-lens ehambayo.

1.3 Operation Monitor: The VIOS software screen ebonisa uMsebenzi weUmatshini we-SMT.Ukuba kukho impazamo okanye ingxaki ngexesha lokuSebenza, ulwazi oluchanekileyo luya kuboniswa kwesi sikrini.

1.4 Isibane seSilumkiso: Sibonisa iimeko zokusebenza kwe-SMT ngokuluhlaza, tyheli nabomvu.

Luhlaza: Umatshini uphantsi kokusebenza okuzenzekelayo

Mthubi: Impazamo (ukubuyela kwimvelaphi ayinakwenziwa, thatha impazamo, ukusilela ekuqondeni, njl. njl.) okanye uqhagamshelo lwenzeka.

Ubomvu: Umatshini ukwindawo yokuyeka ngokukhawuleza (xa umatshini okanye iqhosha lokumisa le-YPU licinezelwe).

1.5 IQhosha lokuMisa ngokuNgxamisekileyo: Cofa eli Qhosha ukuze uqalise i-Emergency Stop ngoko nangoko.
 
2. INdibano yeNtloko

Indibano yentloko esebenzayo: hamba kwicala le-XY (okanye u-X) ukuze uthabathe iinxalenye kwi-feeder kwaye uzincamathele kwi-PCB.
I-Handle Movement: Xa ulawulo lwe-servo lukhutshwa, unokuhamba ngesandla sakho kwicala ngalinye.Le Handle idla ngokusetyenziswa xa uhambisa intloko yomsebenzi ngesandla.
 
3. Inkqubo yombono

Ikhamera ehambayo: Isetyenziselwa ukuchonga amanqaku kwi-PCB okanye ukulandelela indawo yefoto okanye ulungelelwaniso.

Ikhamera ye-Single-Vision: Isetyenziselwa ukuchonga amacandelo, ngakumbi lawo ane-pin QPFs.

Iyunithi yokukhanya ngasemva: Xa ichongiwe nge-lens ebonakalayo ezimeleyo, khanyisa i-elementi ukusuka ngasemva.

Iyunithi yeLaser: I-Laser beam ingasetyenziselwa ukuchonga iindawo, ubukhulu becala iindawo ezinqabileyo.

Ikhamera ye-Multi-vision: inokuchonga iindawo ezahlukeneyo ngexesha elinye ukukhawulezisa isantya sokuqaphela.

4. I-SMT feederIcwecwe:

I-band-loading feeder, i-bulk feeder kunye ne-tube-loading feeder (i-multi-tube feeder) inokufakelwa kwiqonga elingaphambili okanye elingasemva le-SMT.

5. Uqwalaselo lwe-Axis
Umgca we-X: hambisa indibano yentloko esebenzayo ngokunxusene nesalathiso sothumelo lwe-PCB.
I-axis ye-Y: Hambisa indibano yentloko esebenzayo ngokwe-perpendicular ukuya kulwalathiso lothumelo lwe-PCB.
Umgca we-Z: ulawula umphakamo wendibano yentloko esebenzayo.
I-axis ye-R: lawula ukujikeleza kweshafu yombhobho wokufunxa wendibano yentloko esebenzayo.
I-axis: lungelelanisa ububanzi bomzila kaloliwe wezothutho.