Yintoni iNkqubo yoTshintsho lwe-SMT Feeder?

1. KhuphaI-SMT feederkwaye ukhuphe ipleyiti yephepha esetyenzisiweyo.

2. Umqhubi we-SMT unokuthatha izinto kwi-rack ye-material ngokwezitishi zabo.

3. Umsebenzisi ujonga izinto ezisusiweyo kunye netshati yendawo yokusebenza ukuze aqinisekise ubungakanani obufanayo kunye nenombolo yemodeli.

4. Umqhubi uhlola i-pallet entsha kunye ne-pallet endala, kwaye ukhangele ukuba iinkcukacha kunye neemodeli zeepalethi ezimbini zifana ngqo.

5. Ukuhlolwa komsebenzisi wezinto zayo kungabonisa ukuba ngaba ishishini lihambelana ne-pallet.

6. Ukuba olu hlolo lungentla aluqhelekanga, umqhubi we-SMT kufuneka ngoko nangoko azise ukulibaziseka kokulungiswa.

7. Iisampulu zithathwa kwiphalethi entsha kwaye izinto eziphathekayo zinokumiswa kwipalethi endala nentsha.

8. Thatha i-Feeder material esanda kufakwa kwaye uyinamathisele kwiphepha lerekhodi lenkqubo ye-refueling, ugcwalise ixesha lokusebenza lokugcwalisa i-refueling, ulawulo lwabaqhubi kunye nezinye iinkcukacha ezifanelekileyo kunye nolwazi.

9. Ngokutsho kweUmatshini we-SMTkwisikhululo ukufaka Feeder kukhetha kwaye ubeke umatshini;Kufuneka wenze irekhodi elisemthethweni lokuzalisa ulwazi lwakho olongezelelweyo.

10. Umqhubi wazisa abasebenzi bolawulo lomgangatho wobunjineli bokulinganisa izinto kunye nokuvavanya, kwaye utshintsho lwezinto eziphathekayo kunye nokuhlolwa kufuneka kwenziwe.

11. I-IPQC ijonga ukuba ingaba idatha kunye neenkcukacha zingaphuhliswa ngokuchanekileyo kwaye ingaba isiza sinokuphuhliswa ngokuchanekileyo na ngokwetheyibhile yeenombolo zesayithi.